home *** CD-ROM | disk | FTP | other *** search
- From: steuer@clam.rutgers.edu (robert Steuer)
- Newsgroups: alt.radio.scanner
- Subject: PRO-2026 MODS!!!
- Message-ID: <Oct.20.10.55.49.1992.11077@clam.rutgers.edu>
- Date: 20 Oct 92 14:55:50 GMT
- Organization: Rutgers Univ., New Brunswick, N.J.
- Lines: 29
-
- Hi all, just got these mods, hot off the FAX!
-
- Note: It is not lawful to monitor cellular or conventional mobile
- telephone conversations.
-
- The 2026 has cellular frequencies deleted at the factory, but
- restoration is the easiest ever! - clip one marked wire! All you need
- is a Philips screwdriver and wire cutters.
-
- 1. Turn the scanner upside-down and remove the four side screws
- holding the bottom cover in place; pull the cover loose and set it
- back about two inches out of the way.
-
- 2. Locate the small circuit board at the lower right-hand corner and
- find jumper L201. Cut it and slightly separate the break.
-
- 3. Reassemble the radio which now has continuous 806-956 MHz coverage
- and 30KHz search increments in the cellular band.
-
- *** I have not tried the above mod, but did acquire it from a
- commercial radio dealer who is very respectable, so as always, proceed
- at your own risk and realize that this will violate your warranty!
-
- Have Fun!
- Rob KF2EK
- -------------------------------------------------------------------------------
- | Robert Steuer Internet: steuer@clam.rutgers.edu |
- | Rutgers University Amateur Radio: KF2EK@N3FOA.#EPA.PA.USA.NA |
- -------------------------------------------------------------------------------
-
-
-
- Copied from the QRZ! Windows Ham Radio CDROM
-
-